Pm43 / Pm43C Lcd Touch Panel And Display Assembly - Intermec pm43 Service Manual

TITLE
PM43 Service Work Instructions

PM43 / PM43c LCD Touch Panel and Display Assembly

OPERATION:
This section covers the replacement of LCD display assembly and LCD touch panel.
Tools Required
Description
Torx Driver
Tweezer
Parts Required
Item Part Number
1 346-314S-001
2 346-315S-001
3 643-171S-001
4 643-200S-001
5 800-593-006
LCD Display Assembly Replacement
1. Remove the front panel to access the LCD display for replacement. See page 11 on how to remove the front panel.
2. Remove user interface PCB assembly. See page 43 on how to remove the user interface PCB assembly.
3. Remove the overlay. See page 48 on how to remove the overlay.
4. Remove the torx screwing the touch panel under the overlay. See Figure 2.
5. Remove the 5 torx screws securing the user interface PCB support bracket. See Figure 1 on torx locations for PM43. PM43c
has 3 torx screws securing the user interace PCB support bracket.
6. Reverse the procedure for re-installation.
3.0 lbf.in/3.5 kgf.cm
Description
LCD Display Assembly, PM43 / PM43c
LCD Touch Panel, PM43 / PM43c
User Interface PCB Support Bracket, PM43
User Interface PCB Support Bracket, PM43c
Screw, Plastite, M3x6, PH, Torx, T10 (3 lbf.in/3.5kgf.cm, 2.6 lbf.in/3 kgf.cm)
5
Figure 1 – PM43 Full Touch Front Panel
Intermec Proprietary Document
Model DOCUMENT NO.
PM43,PM43C SWIPM43x-000
Part Number
T10
PAGE
Page
44 of 70
Qty
1
1
1
1
5