I Id-Rp2L - Icom ID-RP2 Instruction Manual

I ID-RP2L

q
q POWER CABLE CONNECTOR [DC13.8V] (p. 11)
Connects to ID-RP2C to be supplied the DC power.
Cable length: Approx. 30 m; 100 ft
w ANTENNA CONNECTOR [ANT] (p. 11)
Connects an optional parabolic antenna AH-106 or
AH-107.
e STATUS INDICATOR [STATUS]
Indicates the following unit conditions.
• Light : The power is ON and function-
ing correctly.
• Flashing slowly: Unlock PLL
If the indicator still flashing even
after rebooting, contact authorized
Icom dealer or distributor.)
• Flashing fast : Setting data malfunction.
(Data initializing and re-setting are
• Light off : The power is OFF.
w
(Reboot the ID-RP2L.
required using with the ID-RP2L
utility software.)
r TEST PLUG [TEST] (p. 18)
Connects the supplied test plug* when adjusting the
parabolic antenna beam.
Test mode is automatically selected when connect-
ing the test plug.
IMPORTANT!: Attach the waterproof cap during
q RSSI output
w TEST
*See p. 18 for test plug assembling and connections de-
tails.
t DATA CABLE CONNECTOR B [DATA B] (p. 11)
Connects to the ID-RP2C for transmit/receive sig-
nal data and control signal communications.
Cable length: Approx. 30 m; 100 ft
y DATA CABLE CONNECTOR A [DATA A] (p. 11)
Connects to the ID-RP2C for transmit/receive sig-
nal data and control signal communications.
Cable length: Approx. 30 m; 100 ft
8
PANEL DESCRIPTIONS
e
r
t
y
normal operation.
e GND
r GND
Front view
3