Hussmann ESC Installation And Operation Manual page 22

7. Glass Replacement & Right – Left Adjustment
1. Open glass
panel.
Relieve the
tension on
the hinge.
PVC
U-channel
3. Use tip of
screwdriver to
gently tap loose
wedge the entire
length of the panel
FOR PROMPT SERVICE
WHEN CONTACTING THE FACTORY
REGARDING PROBLEMS, BE SURE TO
HAVE THE CASE MODEL AND
SERIAL NUMBER HANDY.
THIS INFORMATION IS ON A PLATE
LOCATED ON THE CASE ITSELF.
2. Back out
all the set screws
along the top
edge of the glass
panel
(3mm set screw)
4. Slide glass panel
in desired direction
or remove panel
22
IGSV-ESC-0303
Inside
of Case
Back
of Case