Refueling The Vehicle - Jeep WRANGLER 4Xe 2022 Manual

52 STARTING AND OPERATING
Holding the gear selector in the (-) position will

downshift the transmission to the lowest gear
possible at the current speed.
Transmission shifting will be more noticeable

when AutoStick is enabled.
The system may revert to automatic shift mode

if a fault or overheat condition is detected.
NOTE:
When Selec-Speed Control is enabled, AutoStick is
not active.
To disengage AutoStick mode, return the gear
selector to the DRIVE position. You can shift in or
out of the AutoStick position at any time without
taking your foot off the accelerator pedal.
WARNING!
Do not downshift for additional engine braking
on a slippery surface. The drive wheels could
lose their grip and the vehicle could skid,
causing a collision or personal injury.

REFUELING THE VEHICLE

1. Put the vehicle in the PARK position.
2. Push the fuel filler door release button
(located below the headlight switch).
Fuel Filler Door Release Switch
3. Pushing the button will initiate a sequence of
events to depressurize the fuel system. A
message will display in the cluster when the
vehicle is ready to be fueled.
Instrument Cluster Message
NOTE:
After pushing the release button you will

have 20 minutes to fuel the vehicle; beyond
20 minutes you will need to push the
release button again.
The fuel door should take 15 seconds to

open under normal conditions. It may take
longer to open in some situations, such as
high ambient temperatures.
If you hear a hissing sound when the fuel

cap is removed, wait to begin fueling the
vehicle until after the hissing sound stops.