Table of Contents
Advertisement
30
GETTING TO KNOW YOUR VEHICLE
3. Place the base of the exterior mirror into the
hole on the door, and support it while
attaching the three mirror bolts through the
inside of the door using a #T40 Torx head
driver.
Attach Exterior Mirror
1 — Support Mirror From Outside
2 — Attach Three Mirror Bolts From Inside
NOTE:
Recommended torque for the mirror bolts is
5.9 ft· lb / 8.0 N· m .
4. Repeat steps 1-3 on the opposite side front
door.
SEATS
Seats are a part of the Occupant Restraint system
of the vehicle.
WARNING!
It is dangerous to ride in a cargo area, inside
or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seri-
ously injured or killed.
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and
seat belts. In a collision, people riding in these
areas are more likely to be seriously injured or
killed.
Be sure everyone in your vehicle is in a seat
and using a seat belt properly.
M
A
(R
ANUAL
DJUSTMENT
EAR
WARNING!
Do not pile luggage or cargo higher than the top
of the seatback. This could impair visibility or
become a dangerous projectile in a sudden stop
or collision.
Flip And Fold Rear Seat
The 60/40 split rear seat can be folded down for
added cargo space. To fold the rear seat, proceed
as follows:
1. Pull the cushion strap (located at the rear
center of either seat cushion) forward to lift
the seat cushion.
Pull Release Strap Forward
S
)
EATS
Hide quick links:
Advertisement
Table of Contents
