Jeep WRANGLER 4Xe 2022 Manual page 44

Hybrid supplement
Table of Contents

Advertisement

42
GETTING TO KNOW YOUR INSTRUMENT PANEL
Trip Info
Push and release the up
or down
button until Trip Info is highlighted in the
instrument cluster display. Push the left
right
arrow button to scroll through the Trip A
and Trip B submenus. The Trip information will
display the following:
Trip A
Distance Electric
Distance Hybrid
Distance Total
Average Energy Economy
Elapsed Time
Hold the OK button to reset feature information.
Trip B
Distance Electric
Distance Hybrid
Distance Total
Average Energy Economy
Elapsed Time
Hold the OK button to reset feature information.
WARNING LIGHTS AND MESSAGES
arrow
The warning/indicator lights will illuminate in the
instrument panel together with a dedicated
or
message and/or acoustic signal when applicable.
These indications are indicative and precautionary
and as such must not be considered as exhaustive
and/or alternative to the information contained in
the Owner's Manual, which you are advised to
read carefully in all cases. Always refer to the
information in this chapter in the event of a failure
indication. All active telltales will display first if
applicable. The system check menu may appear
different based upon equipment options and
current vehicle status. Some telltales are optional
and may not appear.
R
W
ED
ARNING
Stop Safely Vehicle Will Shut Off Soon
This warning will be displayed when the
vehicle has determined an operational
issue, which will cause the vehicle's
propulsion system to turn off, will occur
shortly. If the light turns on while driving, stop the
vehicle in a safe location as soon as possible.
Have the vehicle transported to an authorized
dealer for service.
L
IGHTS
Hybrid Electric Vehicle System Service
Light
This warning light will illuminate when
service to the hybrid electric system is
needed. It will be accompanied by a
"Service Hybrid Electric Vehicle System"
message in the cluster. If the telltale stays on or
continues to come on, contact an authorized
dealer as soon as possible.
Plug Status Fault Warning Light
This warning light will illuminate when a
plug status fault is detected (when
vehicle not in motion). It will be
accompanied by a cluster message
indicating the type of fault. You may receive one of
the following messages if a fault is detected:
"Service Charging System" – If you see this
message, it is recommended to unplug and plug
in again, or try a different charging station. If an
issue continues, contact an authorized dealer to
service your high voltage charging system.
"Issue Detected Check External Charging
Station" – If you see this message, the charging
station might be powered off, have an internal
fault or be scheduled to charge later. It is recom-
mended to try a different charging station. If an
issue continues, then contact an authorized
dealer.

Advertisement

Table of Contents
loading

Table of Contents