Jeep WRANGLER 4Xe 2022 Manual page 24

22 GETTING TO KNOW YOUR VEHICLE
In extreme hot or cold environments, the lights on
the state of charge indicator may not illuminate.
Charge status is available in the instrument cluster
display. In the event of an error in the charging
process, the outer two lights will blink.
When the hood is open, the lights on the state of
charge indicator will not be illuminated.
Number Of Indicator Percent Of
Lights Illuminated Battery Charge
1st light blinks
1st light on,
21 – 40%
2nd light blinks
1st and 2nd lights on,
41 – 60%
3rd light blinks
1st, 2nd, and
3rd lights on, 61 – 80%
4th light blinks
1st, 2nd, 3rd, and
4th lights on, 81 – 99%
5th light blinks
All five lights on
Two outer lights Indicates an error in the
are blinking charging process
Number Of Indicator
Lights Illuminated
Lights turn on one at
a time from left to
right (when looking
at the front of
the vehicle)
All lights turn on, then
immediately turn off
0 – 20%
NOTE:
For each segment of lights illuminated indicating
the percent of battery charge, two different blink
rates are used. A blink rate of 1 second on/1
second off indicates that the first half is charging.
The blink rate will increase to 0.5 second on/0.5
second off to indicate that the second half is
charging. When the battery is fully charged, the
blinking stops and the lights remain illuminated as
charging continues.
Next to the charging inlet, there is an LED that
changes color based on charging status.
100%
Percent Of
Battery Charge
Indicates system is
waiting for scheduled
time in charge schedule
to begin charging
Indicates a
successful plug-in
LED Light Color
Flashing Green
Solid Green
Blinking Red
Charging Inlet LED Location
LED Charging Inlet
Status
Indicates that the
Blue system is waiting for a
scheduled recharge.
Charging process in place.
Indicates the vehicle
is fully charged.
Indicates a fault in the
charging system.