About The Operating Instructions; Open-Source Software; Security Information - Siemens SICHARGE UC 150 Operating Instructions Manual

1.2

About the operating instructions

These operating instructions contain the information required for safe operation and intended use of the SICHARGE UC
charging station.
Safekeeping the operating instructions
The operating instructions are an integral part of the product and an indispensable part of the product safety concept. The
following requirements therefore apply for safekeeping the operating instructions:
• Keep the operating instructions for the entire service life of the charging station.
• Make the operating instructions easily accessible at all times for all persons involved.
• If you transfer the charging station to third parties, also pass along the operating instructions.
Using the operating instructions
How to use the operating instructions correctly:
• Make the operating instructions available to all persons involved before and during work on the charging station.
• Read the operating instructions carefully before starting work.
• Follow the safety instructions and handling instructions.
See also
Technical specifications (Page 65).
1.3

Open-source software

Open-source software is used in the firmware of the product described. Open-source software is provided free of charge. We are
liable for the product described, including the open-source software contained in it, pursuant to the conditions applicable to the
product. Siemens accepts no liability for the use of the open-source software over and above the intended program sequence or
for any faults caused by modifications to the software.
For legal reasons, we are obliged to publish the original text of the license conditions and copyright notices. Please also read the
information that is supplied with the product or made available here
uuid:beda63de-e83a-4598-9863-7645d0c0dda8/sicharge-uc-open-source-software.pdf).
1.4

Security information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems,
machines, and networks.
In order to protect plants, systems, machines, and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions constitute one
element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems, machines, and networks. Such systems,
machines, and components should only be connected to an enterprise network or the internet if and to the extent such a
connection is necessary and only when appropriate security measures (such as firewalls and/or network segmentation) are in
place.
(https://assets.new.siemens.com/siemens/assets/api/
Operating Instructions | SICHARGE
7