Scanner Functions; Scanning Overview - Sharp AR-7024 Operation Manual

Chapter 5
5

SCANNER FUNCTIONS

This chapter explains how to use the scanner functions.
• Scanning is not possible when the front or side cover is opened for machine maintenance, or when a misfeed
Note
occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
• If an original misfeed occurs in the RSPF, scanning will not be possible until the misfed original is removed and
the RSPF is restored to a usable state.

SCANNING OVERVIEW

The flow chart shown below provides an overview of scanning.
Scanning from the machine*
For more information, refer to
To perform "Scan to USB memory", connect a USB
memory to the machine.
Or to prepare for using Sharpdesk Mobile, select the
machine in Sharpdesk Mobile and tap [Scan].
If the machine is connected to a network, make sure
the machine and network are correctly connected.
Change the machine to scanner mode and select
the scan menu. (ScanMenu SC1: to ScanMenu
Set the scan preferences
(only if the preferences are set to appear)
"OUTLINE OF BUTTON MANAGER" (p.80)
"SENDING OVER A NETWORK, TO A USB
MEMORY DEVICE, OR TO A MOBILE DEVICE"
1
* To scan using the machine's operation panel, you must first install Button Manager and establish the appropriate settings in the
Control Panel. For details, see
function can be used. To use Scan to e-mail/Scan to FTP/Scan to USB/Scan to Desktop (Sharpdesk)/Sharpdesk Mobile, set on
the Web page.
2
* TWAIN is an international interface standard for scanners and other image acquisition devices. By installing a TWAIN driver on
your computer, you can scan and work with images using a variety of TWAIN-compliant applications.
3
* WIA (Windows Imaging Acquisition) is a Windows function that allows a scanner, digital camera or other imaging device to
communicate with an image processing application. The WIA driver for this machine can only be used in Windows 8.1/10.
4
* WIA cannot be used on models with the network expansion kit installed.
78
1
Place the original in the scanning position
"SCANNING USING THE KEYS ON THE MACHINE"
SC6:)
Scanning
(p.82)
"SETTING UP BUTTON MANAGER"
Scanning from a
2
TWAIN* -compliant or
3, 4
WIA* * -compliant application
Start up a TWAIN-compliant or WIA-compliant
application, and select the machine's scanner
driver.
Set the scan preferences
Scanning
"SCANNING FROM A TWAIN-COMPLIANT
APPLICATION" (p.86)
"SCANNING FROM A WIA-COMPLIANT
APPLICATION (Windows 8.1/10)" (p.90)
(p.24). Button Manager cannot be used when the network
(p.79).