Misfeed In The Bypass Tray - Sharp AR-7024 Operation Manual

Section C
Remove the misfed original from the exit area.
If the misfed original cannot be easily removed
from the exit area, open the feeding roller cover,
open the document feeder tray, and remove the
original.

MISFEED IN THE BYPASS TRAY

1
Gently pull the misfed paper out.
2
Open and close the RSPF to make the
misfeed location indicator stop
blinking.
3
Return the originals indicated by the
minus number in the display to the
document feeder tray and press the
[START] key ( ).
Copying will resume from the originals that still
remained when the misfeed occurred.
2
Open and close the side cover.
• When closing the side cover, press down on
Note
the handle.
• If the misfeed indicator (
blinking, check for torn pieces of paper in
the machine.
• When closing the side cover, remove the
paper on the bypass tray first. If not, the
front paper will be smudged that cause the
lose of image or misfeed.
TROUBLESHOOTING
You can also make the
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover.
The misfeed indicator
( ) will go out.
) does not stop
115
7