Sharp AR-7024 Operation Manual page 118

TROUBLESHOOTING
C. Misfeed in the transport area
1
Open the fusing paper guide by
pressing down the green-labeled
projection on the guide and remove
the misfed paper.
The fusing unit is hot. Do not touch
Warning
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
2
If the misfed paper cannot be removed
by the previous step but is visible in
the paper output area, remove the
paper by pulling it into the paper
output area.
3
Close the side cover.
• When closing the side cover, press on the
Note
handle.
• If the paper was torn, make sure that no
torn pieces remain in the machine.
• If the misfeed indicator (
blinking, check for torn pieces of paper in
the machine.
118
Be careful not to tear the
misfed paper during
removal.
Be careful not to tear the
misfed paper during
removal.
The misfeed indicator
( ) will go out.
) does not stop