Sharp AR-7024 Operation Manual page 16

SETUP
When the machine will be connected with a USB cable
(When the network expansion kit or the printer expansion kit is installed)
1
Perform steps 2 through 6 in
the machine is connected to a
network" (p.14).
2
Click the "Printer Driver" button.
3
Click the "Custom installation"
button.
4
When you are asked how the printer is
connected, select "Connected to this
computer" and click the "Next"
button.
16
5
"When Follow the on-screen instructions.
Read the message in the window that appears and
click the "Next" button.
When the installation completed screen appears, click
the "OK" button.
Caution
6
Click the "Close" button in the
window of step 2.
When a message appears prompting you to connect
the machine to your computer, click the "OK" button.
Note
If a warning window regarding security is
displayed, please click "Install this driver
software anyway" or "Install".
After the installation, a message prompting
you to restart your computer may appear. If
this message appears, click the "Yes" button
to restart your computer.