Creating Margins When Copying (Margin Shift) - Sharp AR-7024 Operation Manual

CREATING MARGINS WHEN COPYING
The MARGIN SHIFT feature, in its initial setting, automatically shifts the text or image to increase the margin by
approximately 10mm (1/2").
The location of the margin to be increased can be selected to be either at the left edge or the top of the page.
A
Original
• The margin width can be changed in the system settings.
Note
• Note that a margin is created by shifting the image, and thus if the image is shifted too far, the edge of the image
may be cut off.
• If the ORIGINAL SIZE indicator blinks when margin shift is selected, rotate the original so that it is in the same
orientation as the blinking ORIGINAL SIZE indicator.
• Top Edge can not be used in AR-7024.
1
Place the original(s).
2
If the original is placed on the document
glass, select the original size.
When using the RSPF, make sure that the same
size as the size of the placed original appears in
the size display.
3
Press the [MARGIN SHIFT] key (
Margin
If you are using the
document glass, place
the side of the original
where you wish to create
the margin on the right.
If you are using the
RSPF, place the side of
the original where you
wish to create the margin
on the right.
(p.44)
).
The margin indicator
lights.
Margin
A
Left Edge
(p.94)
4
Set the number of copies and other
settings, and then press the [START]
key ( ).
The copy is delivered to the paper output tray.
To cancel margin shift, press the [MARGIN
Note
SHIFT] key (
MARGIN SHIFT indicator (
Select the location of the margin
1
Hold down the [MARGIN SHIFT] key
( ) until the MARGIN SHIFT
indicator (
The currently selected setting code for the margin
position blinks in the number of copies display.
1: Left edge 2: Top edge
2
Press the [1] key or the [2] key, and
then press the [START] key (
The selected setting code for the margin position
lights.
3
Press the [MARGIN SHIFT] key (
The MARGIN SHIFT indicator (
blinking.
COPY FUNCTIONS
(Margin Shift)
A
Top Edge
) repeatedly until the
) is off.
) blinks.
).
) stops
3
).
63