Table of Contents
Advertisement
Programmed Activation by FACP
Access Programming Mode by pressing the 2 key. The following screen will be displayed:
Entering the Master level password (default 00000) will cause the following screen to appear:
Select the Input Zone option by pressing 1. The following screens will be displayed.
Pressing the down arrow key will display additional Zones.
Pressing the number corresponding to the desired Zone while viewing an Input Zone screen will
cause a screen similar to the following to be displayed:
132
PROGRAMMING
ENTER PASSWORD
*****
PROGRAMMING
1=INPUT ZONES
2=NACS
3=RELAYS
INPUT ZONES
1=ZONE 1
2=ZONE 2
3=ZONE 3
Input Zone Screen #1
PULL STATION
*********************
ZONE 1
PRESS
TO EDIT
Audio Command Center Series Manual — P/N 51889:E1 6/8/2010
MS-5UD-3/7 and MS-10UD-3/7
Advertisement
Table of Contents
