Honeywell Fire-Lite Alarms ACC-25/50 Instruction Manual page 113

MS-9600, MS-9200UDLS and MS-9200UD
Access Programming Mode by pressing the 2 key. The following screen will be displayed:
Entering the Master level password (default 00000) will cause the following screen to appear:
Select the Zone Setup option by pressing 3. The following screens will be displayed.
Audio Command Center Series Manual — P/N 51889:E1 6/8/2010
PROGRAMMING
ENTER PASSWORD
*****
PROGRAMMING
1=AUTOPROGRAM
2=POINT PROGRAM
3=ZONE SETUP
ZONE SETUP
1=ENABLE
2=DISABLE
3=ZONE 97 98 99
Zone Setup Screen #1
ZONE SETUP
1=ZONES INSTALLED
2=ZONES ENABLED
3=ZONES DISABLED
Zone Setup Screen #2
ZONE SETUP
1=ZONE TYPES
2=ZONES AVAILABLE
3=ZONE MESSAGE
Zone Setup Screen #3
Programmed Activation by FACP
113