Before You Start - Rinnai Novo Cube Installation Manual

Before you start

Unpack the appliance and components and check for damage. DO NOT install any damaged items.
Check all components have been supplied, refer below, and that you have the correct gas type.
Read these instructions to get an overview of the steps required before starting the installation.
Failure to follow these instructions could cause a malfunction of the appliance. This could result in
serious injury and/or property damage.
Novo DV Cube
9 Engine
9 Cube wrap
1
9 Outer frame
9 IR remote
9 Stainless steel gas pipe
1
Engine, wrap, and frame come fully assembled
3
Supplied inside the fire
Novo freestanding vertical flueing
Images are representative of some flueing options, components
will be dependent on flue configuration and installation.
OPTIONAL ACCESSORIES
Novo Freestander - cabinet base (R2362GL)
The cabinet comes as a flat pack. An additional
flexi and connector is also
provided as a longer gas
connection is needed.
Novo freestanding mesh frame: R2371
Black integrated mesh guard, can be easily
installed, no fixing required.
Designed to protect against
touching the hot surface of
the glass .
1
1
The mesh will still get very hot—it is not a fire guard
4 | Novo freestanding installation guide:13992-A 01-22
1
2
Two are factory fitted on the fire, two are supplied in the accessory pack
9 Brass adapter
9 Aeration plates and screws
9 Log set and granules
9 Operation, and installation guides
Novo Freestander - plinth base (R2363GL)
The plinth comes as a flat pack. An additional
flexi and connector is also
provided as a longer gas
connection is needed.
Wi-Fi module retrofit kit: R7000
Kit enables the fire to be connected to the
Rinnai Fire Wi-Fi App for full
thermostatic control, as well
as other features such as
timers.
2
3