Related Manuals for Rinnai LS Series
Summary of Contents for Rinnai LS Series
- Page 1 Models: LS800 (RHFE0800) LS1000 (RHFE1000) LS1500 (RHFE1500) LS Series - Gas Fireplace Operation Manual...
- Page 2 Congratulations on the purchase of your Rinnai LS Series Gas Fireplace. We trust you will have many years of comfort and enjoyment from your appliance. BEFORE USING THIS APPLIANCE Before proceeding with the operation or installation read this manual thoroughly and gain a full IMPORTANT understanding of the appliance, to ensure safe and correct use.
-
Page 3: Table Of Contents
Wi-Fi App Features ................................12 Resetting Wi-Fi Module ..............................12 Care & Maintenance Error Codes ..................................13 Normal Operational Characteristics ..........................13 Trouble Shooting Checklist .............................. 14 Service ....................................14 Abnormal Flame Pattern ..............................15 Cleaning ..................................... 15 Contacts Rinnai RHFE0800_1000_1500 OM... -
Page 4: Warnings & Important Information
For safety and warranty purposes, appliances that may be damaged or incorrect must not be installed or operated under any circumstances. Installation of damaged or incorrect appliances may contravene local government regulations. Rinnai disclaims any liability or responsibility whatsoever in relation to the installation or operation of damaged or incorrect appliances. -
Page 5: Modifications
WARNING: This heater MUST NOT be used if any of the glass panels are damaged. Flue terminal MUST always vent directly to outdoors. DO NOT extend the flue vertically or horizontally in ways other than prescribed in this appliance manufacturer’s installation instructions. ONLY the flue components specified by Rinnai must be used. When considering... -
Page 6: Operational Safety Warnings
When the heater is operated for the first time or after long periods of non use a slight odour may be emitted, this is normal. However if odours persist switch ‘OFF’ the appliance and contact Rinnai. Young children should be supervised at all times. Hand or body contact with the warm air discharge louvres and glass must be avoided. -
Page 7: Safety Devices
These devices within the appliance automatically cut of the gas supply to the burners in the event of a flame failure. Refer to the “CARE AND MAINTENANCE” pages; 13 through 15 for further information. Pressure Relief The burner box glass panel is secured to the burner box via spring loaded pressure relief fasteners. Rinnai RHFE0800_1000_1500 OM... -
Page 8: About Your Heater
Room temperature display: Displays the current temperature of the room in which the control is located. See "Remote Control Operation" on page 10. Room temperature sensor Senses the temperature of the room in which the control is located. Rinnai RHFE0800_1000_1500 OM... -
Page 9: Control Panel Operation
In the event that either method of remote operation is not available, this appliance may still be operated in a limited capacity by using the power Standby / ON button as described in the note above. Rinnai RHFE0800_1000_1500 OM... -
Page 10: Remote Control Operation
NOTE Refer to "Control Panel Operation" on page 9 for details on how to use the appliance in this mode and the limitations of this form of operation. Rinnai RHFE0800_1000_1500 OM... -
Page 11: Battery Safety
Noting that 0X (OK) will briefly be shown on the digital display to confirm that the batteries have been successfully replaced. Remember to dispose of used button batteries immediately and safely. IMPORTANT Rinnai RHFE0800_1000_1500 OM... -
Page 12: Wi-Fi / App Operation
Tool Tips & Guides - The app supports a extensive inbuilt app user guide and tool tips function. For more information about how to use the Rinnai Wi-Fi App, refer to the ‘Wi-Fi control user guide’ available on the Rinnai website, www.rinnai.com.au, enter "Wi-Fi user guide" into the search field. -
Page 13: Care & Maintenance
ERROR CODES The LS series heaters have self diagnostic electronics that monitor the appliance during start up and operation. Should a fault occur the heater will shut down. The fault that has caused a shut down will be indicated with an error code, via the Wi-Fi app on your smart device. -
Page 14: Trouble Shooting Checklist
If the power supply cord or any other component of the heater are damaged, they MUST BE replaced by Rinnai or a suitably qualified person. Rinnai has a Service and Spare Parts network with personnel who are fully trained and equipped to give the best service on your Rinnai appliance. -
Page 15: Abnormal Flame Pattern
/ inadequate flue system or the artificial logs/burn media may have shifted from when the heater was first installed. There are some warning signs that could indicate a problem. If any of the signs below occur, please contact Rinnai. NORMAL FLAME PATTERN... -
Page 16: Contacts
Tel: 1300 555 545* Fax: 1300 555 655 Monday to Friday, 8.00 am to 5.30 pm EST. *Cost of a local call higher from mobile or public phones. For further information visit www.rinnai.com.au or email enquiry@rinnai.com.au innai has a Service and Spare Parts network with...