Dell PowerVault 735N Service Manual page 71

Removing and Replacing Parts: Dell PowerVault 735N Systems Service Manual
7. Reinstall the expansion cards
8. Close the system doors
9. Enter the System Setup program
10. Enter the correct time and date through the System Setup program's Time and Date settings. Also reenter any system configuration
information that is no longer displayed on the System Setup screens, and then exit the System Setup program.
11. Turn off the system and peripherals, and leave them off for at least an hour.
12. After an hour, turn on the system and enter the
Back to Contents Page
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/remove.htm[3/15/2013 4:18:18 PM]
if you removed them in step 5.
and then reconnect the system and peripherals to their AC power sources and turn them on.
to confirm that the battery is operating properly.
System Setup program. If the time and date are still incorrect, replace the system board.