Dell PowerVault 735N Service Manual page 24

Hide thumbs Also See for PowerVault 735N:
Table of Contents

Advertisement

Basic Troubleshooting: Dell PowerVault 735N Systems Service Manual
program.)
Do these indicators flash on and off within approximately 10 seconds after the boot routine starts?
Yes. Proceed to step 3.
No. Troubleshoot the system power supply. If the troubleshooting procedure indicates that the system
power supply is operational, troubleshoot the memory.
3. During the boot routine, observe the system for any of the following indications:
System error messages — See
Beep codes — See
Diskette-drive and hard-disk drive failure — The
up in response to data being transferred to or from the hard-disk drives. If either of these
indicators fails to light up during the boot routine, troubleshoot the diskette drive or hard-disk
drive subsystem, respectively.
Did you fix the problem?
Yes. No further steps are necessary.
No. Proceed to
Using the Dell PowerVault 735N NAS Manager Web UI (User Interface)
The PowerVault 735N NAS Manager is a Web-based user interface that allows you to configure the
PowerVault 735N NAS appliance using the Microsoft Internet Explorer Web browser. The interface consists
of a list of common management tasks grouped under a set of tabs. The NAS Manager also contains a
health/status indicator, providing links to the health summary page, diagnostics page, and monitoring page.
The NAS Manager requires Microsoft Internet Explorer Version 5.0 or later.
NOTES: The PowerVault 735N NAS Manager uses external applications, such as the terminal client,
that become embedded within the browser via active server pages, or ASP. Since Microsoft Internet
Explorer 5.x or later is the only browser with this capability, Netscape Navigator is not supported.
Microsoft Internet Explorer Version 4.0 or greater may be used only with Microsoft Windows NT® 4.0
with Service Pack 4 or greater.
For more information on the PowerVault 735N NAS Manager, see "Dell PowerVault NAS Manager" in
the System Administrator's Guide.
To check the event logs in the PowerVault 735N NAS Manager, perform the following steps:
1. Start your Microsoft Internet Explorer Web browser.
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/basics.htm[3/15/2013 4:18:13 PM]
"System
"System Beep
Using the Dell PowerVault 735N NAS Manager Web UI (User
Messages."
Codes" and
"PERC 2/DC Beep
indicators
Codes."
on the front of the hard-disk drive light
Interface).

Advertisement

Table of Contents
loading

Table of Contents