Dell PowerVault 735N Service Manual page 67

Hide thumbs Also See for PowerVault 735N:

Table of Contents

Removing and Replacing Parts: Dell PowerVault 735N Systems Service Manual

Replacing the SEC Cartridge and Heat Sink Assembly

To install the replacement SEC cartridge and heat sink assembly, see

1. Remove the

terminator card

2. Slide the SEC cartridge into the guide bracket assembly, and firmly seat the assembly until the tabs on the guide bracket assembly snap

into place over the ends of the heat sink (see

3. Close the

system

doors.

System Board

Figure 29. System Board Removal

To remove the system board, perform the following steps.

file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/remove.htm[3/15/2013 4:18:18 PM]

or old

SEC cartridge

from the guide bracket assembly.

Figure

28).

1 System board

2 Thumbscrew

Figure 28

and perform the following steps:

Table of Contents