Cisco Router IOS XR Getting Started Manual page 28

Connecting to the Router Through the Console Port
Figure 1-6 Communication Ports on the PRP-2 for a Cisco XR 12000 Series Router
Remote CLI, CWI, XML,
or SNMP communication.
Remote file storage
Remote terminal for
CLI communication
RJ-45 cable
Local terminal or
terminal server for
CLI communication
To connect to the router, perform the following procedure.
SUMMARY STEPS
1.
2.
3.
4.
5.
Cisco IOS XR Getting Started Guide
1-12
Ethernet cable
Network
RJ-45 cable
Power on the standalone router, or power on Rack 0 in a multishelf system.
Identify the DSC.
Connect a terminal to the Console port of the DSC.
Start the terminal emulation program.
Press Enter.
Chapter 1
User-removable flash disk1
stores installation PIE files
A second internal flash disk0
stores installed software and
active configurations
Management Ethernet connection for
out-of-band network communication
Modem connection
Terminal connection
LED status
displays
(alphanumeric)
Introduction to Cisco IOS XR Software
OL-10957-02