Cisco Router IOS XR Getting Started Manual page 190

Cisco systems router getting started guide
Hide thumbs Also See for Router Cisco IOS XR:
Table of Contents

Advertisement

Interfaces Not Coming Up
Line cards in Cisco CRS-1 routers are called modular services cards (MSCs). The show platform
Note
command output is different for Cisco CRS-1 routers and Cisco XR 12000 Series Routers. When this
command is entered in EXEC mode, the display shows only those nodes assigned to the SDR.
Enter the show ipv4 interface brief command to verify IP address configuration and protocol status:
Step 2
RP/0/RP0/CPU0:router# show ipv4 interface brief
Interface
POS0/1/0/0
POS0/1/0/1
POS0/1/0/2
POS0/1/0/3
POS0/1/0/4
POS0/1/0/5
POS0/1/0/6
POS0/1/0/7
POS0/1/0/8
POS0/1/0/9
POS0/1/0/10
POS0/1/0/11
POS0/1/0/12
POS0/1/0/13
POS0/1/0/14
POS0/1/0/15
POS0/2/0/0
POS0/2/0/1
POS0/2/0/2
POS0/2/0/3
TenGigE0/3/0/0
TenGigE0/3/0/2
MgmtEth0/RP0/CPU0/0
Step 3
Configure the interfaces, as shown in the following examples.
Note
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface pos0/2/0/1
RP/0/RP0/CPU0:router(config-if)# ipv4 address 10.1.1.1 255.0.0.0
RP/0/RP0/CPU0:router(config-if)# no shutdown
RP/0/RP0/CPU0:router(config-if)# commit
RP/0/RP0/CPU0:router(config-if)# end
RP/0/RP0/CPU0:router#
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface pos0/2/0/2
RP/0/RP0/CPU0:router(config-if)# ipv4 address 10.1.1.2 255.255.0.0
RP/0/RP0/CPU0:router(config-if)# no shutdown
RP/0/RP0/CPU0:router(config-if)# end
Uncommitted changes found, commit them? [yes]: yes
RP/0/RP0/CPU0:router#
Enter the show ipv4 interface brief command to verify that the interfaces are "Up" in the Status column:
Step 4
RP/0/RP0/CPU0:router# show ipv4 interface brief
Interface
Cisco IOS XR Getting Started Guide
7-14
You must enter the commit command to make the new configuration part of the active running
configuration. If you end the configuration session, you are automatically prompted to commit
the changes, as shown in the second example:
Chapter 7
IP-Address
Status
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
10.10.1.101
Down
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
unassigned
Shutdown
IP-Address
Status
Troubleshooting the Cisco IOS XR Software
Protocol
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Down
Protocol
OL-10957-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ios xr 3.4

Table of Contents