Applying Configuration Templates - Cisco Router IOS XR Getting Started Manual

Cisco systems router getting started guide
Hide thumbs Also See for Router Cisco IOS XR:
Table of Contents

Advertisement

Wildcards, Templates, and Aliases
Command or Action
Step 5
commit
Example:
RP/0/RP0/CPU0:router(config-TPL)# commit
Step 6
show running-config template template-name
Example:
RP/0/RP0/CPU0:router# show running-config
template tmplt_1
Examples
In the following example, a simple template is defined. The template contents are then displayed with
the show running-config template template-name command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# template jbtest
RP/0/RP0/CPU0:router(config-TPL)# hostname test
RP/0/RP0/CPU0:router(config-TPL)# end-template
RP/0/RP0/CPU0:router(config)# commit
RP/0/RP0/CPU0:router(config)# show running-config template jbtest
template jbtest
hostname test
end-template
In the next example, a template is defined, and the template requires a parameter. The template contents
are then displayed with the show running-config template template-name command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# template test2 (hostname)
RP/0/RP0/CPU0:router(config-TPL)# hostname $hostname
RP/0/RP0/CPU0:router(config-TPL)# end-template
RP/0/RP0/CPU0:router(config)# commit
RP/0/RP0/CPU0:router(config)# show running-config template test2
template test2 (hostname )
hostname $hostname
end-template

Applying Configuration Templates

To apply a template, enter the apply-template template-name [(parameter)] command in global
configuration mode and consider the following guidelines:
Cisco IOS XR Getting Started Guide
6-14
Only one template can by applied at a time.
If the same template is applied multiple times, the most recent application overwrites the previous
ones.
Provide the exact number of parameters for the template.
Templates are applied as a "best effort" operation; only valid changes are committed. If any
command in the template fails, that command is discarded.
Chapter 6
Purpose
Applies the target configuration commands to the running
configuration.
Displays the details of the template.
CLI Tips, Techniques, and Shortcuts
OL-10957-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ios xr 3.4

Table of Contents