Cisco Router IOS XR Getting Started Manual page 113

Chapter 4 Configuring General Router Features
In EXEC and global configuration mode, you can view the SDR configuration for the SDR to which you
are connected. When you are connected to the DSC and operating in administration EXEC and
administration configuration mode, you can view the administration configuration, which includes
hardware assignments for SDRs and multishelf systems.
To display the SDR portion of the running configuration, connect to the appropriate SDR and enter the
show running-config command in EXEC or global configuration mode, as shown in the following
example:
RP/0/RP1/CPU0:router(config)# show running-config
Building configuration...
!! Last configuration change at 11:05:38 UTC Mon May 02 2005 by cisco
!
hostname router
logging console debugging
telnet ipv4 server max-servers 5
username iosxr
password 7 011F0706
group root-system
group cisco-support
!
ntp
interface Loopback99
broadcast
!
interface Loopback999
broadcast
!
interface Loopback9999
broadcast
!
authenticate
max-associations 2000
!
interface Loopback0
ipv4 address 10.1.2.3 255.255.0.0
load-interval 0
!
interface Loopback1
ipv4 address 10.4.5.6 255.255.0.0
!
interface Loopback7
load-interval 0
!
interface Loopback2000
load-interval 0
!
interface Loopback2001
load-interval 0
!
interface Loopback2003
load-interval 0
!
interface MgmtEth0/RP1/CPU0/0
ipv4 address 10.11.12.13 255.255.0.0
!
interface POS0/0/0/0
shutdown
!
interface POS0/0/0/1
shutdown
!
OL-10957-02
Managing Configuration Sessions
Cisco IOS XR Getting Started Guide
4-27