Cisco Router IOS XR Getting Started Manual page 154

Configuration Limiting
Examples
In the following example, the show rpl maximum command is used in EXEC mode to display the
current setting for RPL limits and number of each limit currently in use. A summary of the memory used
by all of the defined policies is also shown below the limit settings.
RP/0/RP1/CPU0:router# show rpl maximum
------------------------------------------------------------
Lines of configuration
Policies
Compiled policies size (kB)
RP/0/RP1/CPU0:router#
In the next example, the rpl maximum command changes the currently configured line and policy
limits. The show rpl maximum command displays the new settings.
RP/0/RP1/CPU0:router# configure
RP/0/RP1/CPU0:router(config)# rpl maximum policies 4000
RP/0/RP1/CPU0:router(config)# rpl maximum lines 80000
RP/0/RP1/CPU0:router(config)# commit
RP/0/RP1/CPU0:Apr
ration committed by user 'UNKNOWN'.
to vi
ew the changes.
RP/0/RP1/CPU0:router(config)# exit
RP/0/RP1/CPU0:Apr
from console by console
RP/0/RP1/CPU0:router# show rpl maximum
------------------------------------------------------------
Lines of configuration
Policies
Compiled policies size (kB)
RP/0/RP1/CPU0:router#
Cisco IOS XR Getting Started Guide
5-22
Current Current
Total Limit
0
0
0
1 00:23:44.062 : config[65709]: %LIBTARCFG-6-COMMIT : Configu
Use 'show configuration commit changes 1000000010'
1 00:23:47.781 : config[65709]: %SYS-5-CONFIG_I : Configured
Current Current
Total Limit
0
0
0
Chapter 5 Configuring Additional Router Features
Max
Limit
65536 131072
3500 5000
Max
Limit
80000 131072
4000 5000
OL-10957-02