NEC NEAX 2000 IVS2 Maintenance Manual page 29

(2) To Clear MJ/MN Alarm:
• To clear both MJ/MN alarms
Operation:
• To clear MJ alarm only
Operation:
• To clear MN alarm only
Operation:
(3) To Display Fault Messages using MATWorX or MATWorX Studio:
Fault Messages Information is available via MATWorX or MATWorX Studio. For the
meanings of 8-byte data in the "Description" column of the MATWorX/MATWorX Studio
interface, see
5 12
information, please consult the Online Help included with MATWorX and MATWorX Studio.
See the example of fault message display using MAT Add-In (
2
NEAX2000 IVS Maintenance Manual
ND-70926 (E), Issue 3.0
ST
EA1 + DE
DE
00 +
CCC + EXE
ST
EA1 + DE
01 + DE
CCC + EXE
ST
EA1 + DE
02 + DE
EXE
CCC +
- in "(1) To Display Fault Message by CAT" on
CHAPTER 1 MAINTENANCE SERVICE FEATURES
COMMAND=
EA1>
EA1>00:00 –
OK
COMMAND=
EA1>
EA1>01:01 –
OK
COMMAND=
EA1>
EA1>02:02 –
OK
Fault Messages
Page 15. For additional
Table 1-8 on Page 22).
Page 21