NEC NEAX 2000 IVS2 Maintenance Manual page 131

(2) At Called Station
START
At the called
telephone does not ring.
The call is routed to a station
other than the dialed number.
Ringing Signal
disconnected after going off-
hook.
END
2
NEAX2000 IVS Maintenance Manual
ND-70926 (E), Issue 3.0
station, the
CHECK
REPLACE
CHECK
is not
REPLACE
CHAPTER 2 TROUBLESHOOTING
Fault Diagnosis and Troubleshooting
(1) "ON" lamp on the PWR card is on.
(2) Volume Control of the telephone
set.
(1) LC card
(2) Telephone set
(3) PWR card (In case all station fails
within same PIM.)
(1) System Data Programming for
destination station Number: CM10
(2) Call Forwarding-All Calls feature is
activated at the destination station.
(1) LC card
(2) FP card
(3) MP card
(4) Telephone set
Page 123