Log - ZyXEL Communications PM7516 Series User Manual

5.2 Log

Use the System Log screen to see the system logs. You can filter the entries by selecting a severity level
and/or category. Click System Monitor > Log to open the System Log screen.
Figure 12 System Monitor > Log
The following table describes the fields on this screen.
Table 9 System Monitor > Log
LABEL
Category
Level
Refresh
Clear Logs
Export
#
Time
Level
Message
Chapter 5 Log
DESCRIPTION
Select the type of logs to display.
Select a severity level from the drop-down list box. This filters search results according to the
severity level you have selected. When you select a severity, the Zyxel Device searches through
all logs of that severity or higher.
Click this to renew the log screen.
Click this to delete all the logs.
Click this to export the selected log(s).
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field displays the severity level of the log.
This field states the reason for the log.
PM7510-R0 User's Guide
22