Chapter 9 Log Setting; Overview; Log Setting - ZyXEL Communications PM7516 Series User Manual

9.1 Overview

You can configure where the Zyxel Device sends logs and which logs and/or immediate alerts the Zyxel
Device records in the Logs Setting screen.

9.2 Log Setting

To change your Zyxel Device's log settings, click Maintenance > Log Setting. The screen appears as
shown.
Figure 17 Maintenance > Log Setting
The following table describes the fields on this screen.
Table 14 Maintenance > Log Setting
LABEL
Syslog Settings
Syslog Logging
Mode
Syslog Server IP
Address
Syslog Server
UDP Port
Apply
Undo
DESCRIPTION
Select Active to enable syslog logging.
Select the syslog destination from the drop-down list box.
If you select Local File, the log(s) will be saved in a local file. If you want to send the log(s) to a
remote syslog server and save it in a local file, select Local File and Remote.
Enter the server name or IP address of the syslog server that will log the selected categories of
logs.
Enter the port number used by the syslog server.
Click this to save your changes and to apply them to the Zyxel Device.
Click Undo to exit this screen without saving.
PM7510-R0 User's Guide
C
H A P T E R
Log Setting
29
9