Servicing The Shock Absorber - Husqvarna FS 450 2018 Repair Manual

9 SHOCK ABSORBER, LINK FORK
64

Servicing the shock absorber

Caution
Risk of injury Parts of the shock absorber will move around if the shock absorber is detached incor­
rectly.
The shock absorber is filled with highly compressed nitrogen.
-
Please follow the description provided.
O
-
Mount screw but do not tighten yet.
Guideline
M10
Screw, bottom
shock absorber
• Info
I
Raise the wheel slightly to be able to mount the screw
more easily.
-
Position the linkage lever.
-
Mount and tighten fitting
Guideline
Nut, linkage lever to
angle lever
Info
Raise the wheel slightly to be able to mount the screw
more easily.
O.
-
Tighten screws
Guideline
Screw, bottom M10
shock absorber
-
Tighten fitting Ci).
Guideline
Nut, angle lever to
link fork
Finishing work
-
Remove the motorcycle from the lift stand.
Condition
The shock absorber has been removed.
60 Nm (44.3 lbf ft)
®
Loctite
8.
M 14x1 .5 80 Nm (59 lbf ft)
60 Nm (44.3 lbf ft)
®
Loctite
M14x1.5 80 Nm (59 lbf ft)
(8 p. 12)
2701
TM
2701
TM
..