Adjusting The Compression Damping Of The Fork; Adjusting The Rebound Damping Of The Fork - Husqvarna FS 450 2018 Repair Manual

6 FORK, TRIPLE CLAMP
16
Adjustin the compression dampin of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
✓ When disconnecting, excess pressure will escape from
the hose - the fork leg itself does not lose any air.
✓ The fork airpump indicator switches off automatically
after 80 seconds.
-
Mount the protection cap.
Info
Only tighten the protection cap by hand.
Finishing work
-
Remove the motorcycle from the lift stand.
O
-
Turn adjusting screw
Info
O
Adjusting screw
right fork leg.
-
Turn counterclockwise by the number of clicks correspond­
ing to the fork type.
Guideline
Compression damping
Comfort
Standard
Sport
• Info
I
Turn clockwise to increase damping; turn counter­
clockwise to reduce damping.
O.
-
Remove protection cap
8
-
Turn adjusting screw
Info
8
Adjusting screw
right fork leg.
-
Turn counterclockwise by the number of clicks correspond­
ing to the fork type.
(8 p. 12)
clockwise all the way.
is located at the upper end of the
15 clicks
12 clicks
9 clicks
clockwise all the way.
is located at the lower end of the
...
...