Installing The Timing Chain; Installing The Rotor - Husqvarna FS 450 2018 Repair Manual

17 ENGINE
17.5.21
17.5.22
238

Installing the timing chain

Installing the rotor

Thread in the timing chain and place it over the timing chain
sprocket.
• Info
I
If the timing chain was used before, ensure it is run­
ning in the correct direction.
Position the timing chain securing guide.
Mount and tighten screw
Guideline
Screw, timing M6
chain securing
guide
-
Thread in timing chain tensioning rail
Mount and tighten screw
Guideline
Screw, timing M6
chain tension-
ing rail
Mount the woodruff key.
Mount the rotor.
O
Mount and tighten nut
Guideline
Nut, rotor M12x1
O.
10 Nm (7.4 lbf ft)
®
Loctite
8
from above.
CD.
10 Nm (7.4 lbf ft)
®
Loctite
with the spring washer.
60 Nm (44.3 lbf ft)
Thread, oiled with
engine oil/cone
degreased
243
™
243
™