Husqvarna FS 450 2018 Repair Manual page 173

Remove the locking piece and position the subframe.
Info
Watch out for the intake flange.
Mount and tighten screw�­
Guideline
MB
Screw, sub­
frame
Remove screw �.
Mount and tighten screw�­
Guideline
MB
Screw, sub­
frame
Repeat the operation on the opposite side.
Mount the vent hose and position hose clamp Ci).
Mount rollover sensor Ci).
Plug in the connector.
G,.
Mount protection cap
ENGINE 17
30 Nm (22.1 lbf ft)
®
Loctite 2701
TM
30 Nm (22.1 lbf ft)
Loctite ® 2701
TM
171