Bildskärmsgångjärn; Removing The Display Hinges - Dell Latitude 5430 Service Handbook

Steps
1. Align and place the sensor board on the display back cover.
2. Connect the display cable to the connector on the sensor board and close the latch.
Next steps
1. Install the display bezel.
2. Install the display assembly.
3. Install the WLAN card.
4. Install the WWAN card.
5. Install the base cover.
6. Install the microSIM card.
7. Install the microSD card.
8. Follow the procedure in
Bildskärmsgångjärn

Removing the display hinges

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the microSIM
4. Remove the base cover.
5. Remove the WLAN card.
6. Remove the WWAN card.
7. Remove the display assembly.
8. Remove the display bezel.
9. Remove the display panel.
About this task
The following images indicate the location of the display hinges and provide a visual representation of the removal procedure.
after working inside your
before working inside your
card.
card.
computer.
computer.
Ta bort och installera komponenter 77