Högtalare; Removing The Speaker - Dell Latitude 5430 Service Handbook

Hide thumbs Also See for Latitude 5430:
Table of Contents

Advertisement

Steps
1. Align the screw holes on the heat-sink assembly with the screw holes on the system board.
2. Connect the system fan cable to the connector on the system board.
3. Replace the two (M2x5) screws to secure the system fan and heat-sink assembly to the system board.
4. Tighten the four captive screws to secure the heat-sink assembly to the system board.
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Install the
microSIM
card.
4. Install the
microSD
card.
5. Follow the procedure in
Högtalare

Removing the speaker

Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
microSIM
4. Remove the
base
cover.
5. Remove the
3-cell battery
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
42
Ta bort och installera komponenter
or
4-cell
battery.
after working inside your
before working inside your
card.
card.
or
4-cell
battery.
computer.
computer.

Advertisement

Table of Contents
loading

This manual is also suitable for:

P137g

Table of Contents