Smartkortläsare; Removing The Smart Card Reader - Dell Latitude 5430 Service Handbook

Steps
1. Align and place the power-button board on the palm-rest assembly.
2. Replace the two (M2x2.5) screws to secure the power-button board to the palm-rest assembly.
Next steps
1. Install the system board.
2. Install the assembly inner
3. Install the memory module.
4. Install the WLAN card.
5. Install the WWAN card.
6. Install the M.2 2280 solid-state drive
7. Install the 3-cell battery
8. Install the base cover.
9. Install the microSIM card.
10. Install the microSD card.
11. Follow the procedure in
Smartkortläsare

Removing the smart card reader

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the microSIM
4. Remove the base cover.
5. Remove the 3-cell battery
6. Remove the M.2 2280 solid-state drive
frame.
or M.2 2230 solid-state
or 4-cell battery.
after working inside your
before working inside your
card.
card.
or 4-cell battery.
or M.2 2230 solid-state
drive.
computer.
computer.
drive.
Ta bort och installera komponenter 51