Dell Latitude 5430 Service Handbook page 53

About this task
The following image indicates the location of the smart card reader and provides a visual representation of the installation
procedure.
Steps
1. Align and place the smart card reader on the palm-rest assembly.
2. Replace the three (M2x2.5) screws to secure the smart card reader to the palm-rest assembly.
3. Adhere the smart card reader cable.
4. Connect the smart card reader cable to the connector on the USH board.
Next steps
1. Install the assembly inner
2. Install the WLAN card.
3. Install the WWAN card.
4. Install the M.2 2280 solid-state drive
5. Install the 3-cell battery
6. Install the base cover.
7. Install the microSIM card.
8. Install the microSD card.
9. Follow the procedure in
frame.
or M.2 2230 solid-state
or 4-cell battery.
after working inside your
drive.
computer.
Ta bort och installera komponenter 53