Minnesmoduler
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
microSIM
4. Remove the
base
cover.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
Steps
1. Using your fingertips, spread apart the securing clips on the memory-module slot until the memory module pops up.
2. Slide and remove the memory module from the memory-module slot on the system board.
NOTE:
Repeat step 1 and 2 if there are two memory modules.
Installing the memory modules
Prerequisites
Om du byter ut en komponent, ta bort den befintliga komponenten innan du utför installationsproceduren.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the installation
procedure.
28
Ta bort och installera komponenter
before working inside your
card.
card.
computer.