Next steps
1. Install the
WLAN
card.
2. Install the
WWAN
card.
3. Install the
base
cover.
4. Install the
microSIM
card.
5. Install the
microSD
card.
6. Follow the procedure in
Bildskärmsram
Removing the display bezel
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
microSIM
4. Remove the
base
cover.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
display
assembly.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
Steps
NOTE:
The display bezel is adhered to the display panel with adhesive. Insert a plastic scribe into the recesses near both
hinge caps to start the prying process to release the display bezel. Pry along the outside edge of the display bezel and work
your way around the entire display bezel until the display bezel is separated from the display cover.
after working inside your
before working inside your
card.
card.
computer.
computer.
Ta bort och installera komponenter
63