Dell Latitude 5430 Service Handbook page 27

Steps
1. Flip the M.2 2230 solid-state drive holder and align the notch on the M.2 2230 solid-state drive with the tab on the M.2
2230 solid-state drive holder.
2. Replace the (M2x3) screw to secure the M.2 2230 solid-state drive to the M.2 2230 solid-state drive holder.
3. Align and insert the M.2 2230 solid-state drive holder to its connector on the system board to accommodate the M.2 2230
solid-state drive.
4. Replace the (M2x3) screw to secure the M.2 2230 solid-state drive holder to the system board.
5. Align the screw holes on the M.2 2230 solid-state drive thermal pad with the screw holes on the M.2 2230 solid-state drive
holder.
6. Replace the two (M2x2.5) screws to secure the M.2 2230 solid-state drive thermal pad to the M.2 2230 solid-state drive
holder.
Next steps
1. Install the base cover.
2. Install the microSIM card.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
Ta bort och installera komponenter 27