Table of Contents
Advertisement
Menu Selection Screen
The Menu Selection Screen displays when you place
the motion-control levers in the N
and press and hold the 2 outside LDU buttons.
Figure 20
1. Outside buttons
The Menu Selection Screen allows you to cycle
through the different menu options by pressing the
toggle button. When the desired menu option is
highlighted, press the enter button to select it.
Note:
All menu options are locked if the
motion-control levers are not in the N
position.
Press and hold the 2 outside buttons to return to the
default screen.
The menu selection screen allows you to cycle
through the following screens.
•
Maintenance and Service Menu (page 10)
•
Gauges and Meters Menu (page 14)
•
Advanced Settings Menu (page 16)
-L
position
EUTRAL
OCK
g364993
2. Menu selection screen
-L
EUTRAL
OCK
1. Maintenance and Service
2. Language
3. Gauges and Meters
4. Advanced Settings
Maintenance and Service Menu
You can scroll between the following screens in the
Maintenance and Service menu:
•
Status of Inputs (page 10)
•
Status of Outputs (page 11)
•
Current Error Messages (page 11)
•
Hydraulic Transmission Oil (page 12)
•
Engine Oil (page 12)
•
Deck Gearbox Oil (page 13)
•
Wheel Drive Gear Box Oil (page 13)
•
Machine Information (page 13)
•
Module Information (page 13)
Status of Inputs
This screen lists all of the inputs to the system and
highlights which is currently active. Inputs with
numerical values display the current value.
1. Status of inputs
2. PTO switch
3. Neutral
4. Oil pressure
5. Air filter
6. Transmission speed
10
Figure 21
5. Cancel/Exit
6. Toggle between screens
7. Enter/Return
Figure 22
7. Seat
8. Engine communication
9. Wing deck
10. Previous
11. Toggle between screens
12. Next
g257032
g320689
Advertisement
Table of Contents
