Table of Contents
Advertisement
Figure 13
1. Start Regen
A.
Shut off the engine and wait for all
moving parts to stop. Ensure that the
machine is on a level surface.
B.
Move the control levers to the neutral
lock position and engage the parking
brake.
Note:
Disengaging the parking brake
or moving the motion-control levers
from the N
time cancels the process and prompts
you to engage the parking brake and
move the motion-control levers to the
N
-L
EUTRAL
Figure 14
1. Set brake and neutral
C.
Ensure that the blades are disengaged.
D.
Ensure that the machine has at least 1/4
tank of fuel.
E.
Select Y (yes) from the Start Regen
screen to confirm the regeneration
process
(Figure
-L
position at any
EUTRAL
OCK
position
(Figure
14).
OCK
15).
g216675
1. DPF Soot %
2. Start Regen?
The regeneration process begins and the
module displays the Regen Active screen
(Figure
cancels the process.
1. Regen Active
g216674
8
Figure 15
3. Previous
4. Next
16). Pressing the cancel button
Figure 16
2. Cancel
g217322
g216678
Advertisement
Table of Contents
