Toro 72144 Software Manual page 18

Historical Error
This screen displays errors that are no longer active.
The log keeps a running count of the number of times
the error has occurred during the life of the machine
and the engine hour at which the last occurred. The
log displays the errors starting with the most recent
occurrence.
1. Historical Error
2. Current error (e.g. Low Oil
Pressure)
Alarms
The alarms screen allows you to activate and
deactivate the audible alarm for individual errors.
Press the Enter button to access individual error alarm
settings.
Note:
Not all audible alarms can be deactivated.
1. Alarms
2. Activate/Deactivate
The highlighted error name indicates that the audible
alarm is active. Pressing enter modifies the status of
the audible alarm to On or Off.
Figure 50
3. Number of times the error
occurred during life of
machine (e.g., 3X)
4. Engine hour at which the
error last occurred
Figure 51
3. Audible Alerts
4. Enter
1. Alarms
2. Clutch Overcurrent
3. Fuel Low
You can deactivate the audible warning for the
g030224
following errors:
•
Service Air Filter
•
Service Engine Oil
•
Service Transmission Oil
•
Transmission Over Temperature
•
Service Gear Box Oil (as applicable)
•
Fuel Low
•
Clutch Overcurrent
•
Clutch Reset Required
•
Engine Error Codes
•
System Overvoltage>16VDC
•
System Undervoltage<9VDC
•
System Voltage Low
•
Anti-Stall
Engine Settings
This screen allows you to adjust the engine speed
at the Maximum, Efficient, and Low set points for
both transport (clutch disengaged) and mow (clutch
engaged) modes in 50 rpm increments.
g030225
1. Engine Settings
Pressing the up arrow increases the engine speed
while pressing the down arrow decreases the engine
speed. Pressing the Enter button confirms the
speed and automatically moves you to the next
screen/engine speed set point.
18
Figure 52
4. Toggle
5. Enter
Figure 53
2. Adjust Engine Speeds
g038366
g030227