Table of Contents
Advertisement
Advanced Settings Menu
When the advanced settings menu is selected, the
module prompts you for a 4-digit passcode. The
default digits on the display screen are 0 0 0 0.
Figure 43
1. Enter password
2. Active digits
3. Increase
The passcode is 1 9 8 2. When the active digit is
highlighted, press the increase or decrease buttons to
scroll through digits from 0 to 9. Press enter to select
the highlighted digit.
If you enter the incorrect password, the module takes
you back to the menu select screen. When the correct
password is entered, you can scroll between the
following screens:
•
Engine Oil (page 16)
•
Hydraulic Transmission Oil (page 16)
•
Deck Gear Box Oil (page 17)
•
Wheel Drive Gear Box Oil (page 17)
•
Historical Error (page 18)
•
Alarms (page 18)
•
Engine Settings (page 18)
•
Adjust the Fan Settings (page 19)
•
Calibrate Engine Settings (page 20)
•
Factory Defaults (page 20)
g030221
4. Enter/Return
5. Decrease
Engine Oil
After performing the necessary maintenance, this
screen allows you to reset the number of hours until
the engine oil service is due.
1. Engine Oil
2. Reminder display
Pressing the reset button brings up a screen asking to
confirm the reset reminder.
Hydraulic Transmission Oil
After performing the necessary maintenance, this
screen allows you to reset the number of hours until
the hydraulic transmission oil service is due.
1. Hydraulic transmission oil
2. Reminder display
Pressing the reset button brings up a screen asking to
confirm the reset reminder.
Every time you reset the hydraulic transmission oil
service reminder, the module prompts you to select
whether the machine was serviced with Toro Premium
Hydraulic Oil. Pressing Y (yes) or N (no) determines
the correct maintenance schedule.
16
Figure 44
3. Remaining hours until
service
4. Reset
Figure 45
3. Remaining hours until
service
4. Reset
g030245
g030246
Advertisement
Table of Contents
