Replacing The Option Board Support Bracket - HP Visualize b132L Owner's Manual

B_configure.doc 153 Thu Jul 11 10:48:31 1996
Figure 56
7 Place the option board support bracket over the edge of the option board and slide
it into the slot on the power supply until the locking tab snaps into place, as shown
in Figure 56.

Replacing the Option Board Support Bracket

8 Replace the main tray assembly as described in Replacing the Main Tray Assem-
bly on page 110.
Changing Your Workstation's Hardware Configuration
Installing a PCI, EISA, or GSC Option Board
153