Accessing The Boot Console Interface - HP Visualize b132L Owner's Manual

D_boot_cons.doc 204 Thu Jul 11 10:49:34 1996
The Boot Console Interface
Displaying and Setting the Monitor Type
To set the monitor type for graphics(0) to monitor type 2 you would enter the
following;
Configuration Menu: Enter command >
Configuration Menu: Enter command > monitor graphics(0) 2
This will take effect on the next reboot.
MONITOR INFORMATION
Path Slot Head
----------- ---- ---- --------
GRAPHICS(0) 0 1 f8000000
The boot console displays a message that tells you that your new monitor
selection will take affect the next time you reboot your system.
The boot console also displays the new monitor information.
Trying to change the monitor type to a number not listed for that graphics
device fails and gives you the following warning message:
Value of monitor type n out of range (n - nn)
Trying to change the monitor type on an empty slot fails and gives you the
following warning message:
No such graphics card.
204
HPA Resolution Freq Type
---------- ---- ----
1280x1024 72Hz
monitor graphics(0) 2
Class
-----
2