dds_tape.doc 57 Thu Jul 11 10:45:35 1996
Verifying the DDS Tape Drive Operation
To verify that your workstation can communicate with the DDS-format tape
drive, enter the following:
/usr/sbin/ioscan -d stape
After a few moments the ioscan utility returns a message similar to the fol-
lowing:
H/W Path
Class
============================================
bc
8
bc
8/16
ba
8/16/5
ext_bus
8/16/5.3
target
8/16/5.3.0
tape
If ioscan does not see your tape drive, it will return the following message:
ioscan: No hardware found
If you receive this message, go to Chapter 5, "Solving Problems."
Using Your Digital Data Storage (DDS) Tape Drive
Operating the DDS Tape Drive
Description
I/O Adapter
Core I/O Adapter
Built-in SCSI
HP
HP35480A
57