HP Visualize b132L Owner's Manual page 102

solve_probs.doc 88 Thu Jul 11 10:47:35 1996
Solving Problems
Running System Verification Tests
1 At a command line prompt, enter the following:
cstm
The following message appears:
Support Tool Manager Version A.01.00
Type 'help' for a list of available commands.
CSTM>
2 At the CSTM> prompt, you can enter several commands. To see what commands
are available, type the help command.
3 To verify the system operation, type the following at the CSTM> prompt:
CSTM> verify all
Messages similar to the following appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
CSTM>Verification of (FPU) has completed.
CSTM>Verification of (CPU) has completed.
Enter
4 Press to return to the CSTM> prompt after all test results are reported.
5 To exit the Support Tools Manager, enter the following:
CSTM> exit
If any tests failed, further diagnosis is necessary by qualified service personnel.
Contact your designated service representative.
88