Removing The Front Fender; Installing The Front Fender - KTM 890 ADVENTURE 2022 Owner's Manual

13.24

Removing the front fender

13.25

Installing the front fender

–
Mount screws
Guideline
Screw, trim
–
Mount screw
Guideline
Screw, fuel tank
spoiler
The front edge of the right fuel tank spoiler is evenly
aligned.
–
Tighten all the screws of the right fuel tank spoiler.
Guideline
Screw, trim
Screw, fuel tank
spoiler
F03359-10
Finishing work
–
Install the battery cover. (
–
Install the right side cover. (
–
Mount the front rider's seat. (
–
Mount the passenger seat. (
–
Remove screws
–
Remove screws
–
Take the fender off to the front.
Info
Pay attention to the brake lines and the cable.
F01924-10
–
Position the fender.
Info
Pay attention to the routing of the brake lines and the
cable.
–
Mount screws
Guideline
Screw, fork protector
F01924-11
–
Mount screws
SERVICE WORK ON THE CHASSIS 13
4
, but do not tighten yet.
M5
5
, but do not tighten yet.
M6
M5
M6
p. 93)
p. 92)
p. 85)
p. 85)
1
.
2
.
1
, but do not tighten yet.
M5x12
2
, but do not tighten yet.
3 Nm (2.2 lbf ft)
5 Nm (3.7 lbf ft)
3 Nm (2.2 lbf ft)
5 Nm (3.7 lbf ft)
5 Nm (3.7 lbf ft)
97