15.1
Removing the front wheel
Preparatory work
–
Raise motorcycle with rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
Remove screw
hole.
–
Remove screws
–
Press back the brake linings by slightly tilting the left and right
brake caliper laterally on the brake disc. Pull the left and right
brake caliper carefully back from the brake disc and hang to
the side.
Info
Do not operate the hand brake lever if the brake
calipers have been removed.
F01961-10
–
Loosen screw
–
Loosen screws
–
Press on screw
clamp.
–
Remove screw
Warning
Danger of accidents Damaged brake discs reduce the
F01963-10
braking effect.
–
Always lay the wheel down in such a way that the
brake discs are not damaged.
–
Hold the front wheel and remove the wheel spindle. Take the
front wheel out of the fork.
–
Remove spacers
F01964-10
1
and pull wheel speed sensor
3
4
and
.
5
by several rotations.
6
.
5
to push the wheel spindle out of the axle
5
.
7
.
WHEELS, TIRES 15
p. 83)
p. 83)
2
out of the
111